manualshive.com logo in svg

Micronics 09-00232 Series, Руководство пользователя

Поделиться
Скачать
Micronics 09-00232 Series Скачать руководство пользователя страница 44

Micronics LPM30 System Board Manual

4-6

Video BIOS

The Video BIOS Option allows you to Shadow, Shadow & Cache, or Disable
the BIOS Shadow on the system board.  Choosing SHADOWED copies the
system’s video BIOS into RAM for faster execution.  Choosing SHADOWED
& CACHED caches the shadowed video BIOS for even higher performance.
Use the <+/-> key to toggle between the options.  The System BIOS Shadow
option must be set to SHADOW or SHADOW & CACHE before enabling the
Video BIOS Shadow options.

On-Board Floppy

The On Board Floppy controller can be set to ENABLED or DISABLED.

Primary IDE

The VL-Bus IDE controller can be set to ENABLED or DISABLED.

Master Speed

The speed can be set for NORMAL, MEDIUM, or FAST.  To improve the
performance of your system, see the manufacturer’s specifications to deter-
mine the optimal setting.  The default setting is NORMAL.

Slave Speed

The speed can be set for NORMAL, MEDIUM, or FAST.  To improve the
performance of your system, see the manufacturer’s specifications to deter-
mine the optimal setting.  The default setting is NORMAL.

Secondary IDE

The ISA IDE controller can be set to ENABLED or DISABLED.

Serial Port 1

Serial Port 1 may be set for COM1 (default), COM3, or may be disabled.  Be
sure this setting does not conflict with any other peripherals.

Serial Port 2

Serial Port 2 may be set for COM2 (default), COM4, or may be disabled.  Be
sure this setting does not conflict with any other peripherals.

Parallel Port

The parallel port may be set for LPT1 (default), LPT2, or may be disabled.  Be
sure this setting does not conflict with any other peripherals.

Parallel Port Mode

The parallel port may be set for AT mode (output only), PS/2 mode (bidirec-
tional), or may be disabled.

Содержание 09-00232 Series




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды