manualshive.com logo in svg

Micronics 09-00232 Series, Руководство пользователя

Поделиться
Скачать
Micronics 09-00232 Series Скачать руководство пользователя страница 113

Additional

FM Synthesizer

Features

20-voice Stereo Synthesizer.

Stereo Digital/Analog Mixer (built-in)

Selectable input and mixing of all audio sources for
recording:

Line-in.
Stereo CD-Audio.
Mono Microphone.
Synthesizer.
Digital Audio.

Stereo Digitized Audio Playback

8-bit and 16-bit sample modes.
Sampling Rate of:

2KHz to 44.1KHz (mono or stereo) .

Hardware audio decompression ESPCM (ratios of
2:1, 3:1, and 4:1).

Audio Amplifier

Frequency Response: 20Hz to 22KHz.

Stereo Digitized Audio Recording

8-bit and 16-bit sample modes.
Sampling Rate of 2KHz to 44.1KHz.

MIDI

Sound Blaster type Joystick/MIDI cable.

Joystick Port/MIDI Interface

Standard built-in (15-pin D-sub) connector.
Game I/O  port for PC analog joystick.
Built-in interface for Sound Blaster MIDI cable.
with MIDI IN and MIDI OUT connectors.
MIDI time-stamp for Multimedia extension.
Sound Blaster MIDI compatible.
64-byte FIFO buffer.

Mono Microphone Input

Automatic Gain Control for direct sound input.

D-3

Specifications

Содержание 09-00232 Series




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды