manualshive.com logo in svg

Micronics 09-00232 Series, Руководство пользователя

Поделиться
Скачать
Micronics 09-00232 Series Скачать руководство пользователя страница 4

iv

7.

Turn the computer on and press the <Ctrl>, <Alt>, and <Esc> keys
simultaneously after you see the screen below:

8.

Set the time and date.  Adjust the BIOS settings to match what is installed
in your system.  If installing an IDE drive, select the IDE device you wish
to configure.  Select AUTO CONFIG and the BIOS will automatically
configure the drive for you.  (Chapter 4)

9.

After you have configured the BIOS settings,  press the <Esc> key
followed by the <F4> key to save the changes and exit.  The system will
reboot.

10. Install the video drivers provided with the system (Chapter 5 and 6).

11. If you are installing a CD-ROM, install the drivers that came with the CD-

ROM.  (Refer to the documentation which came with the CD-ROM).

12. Run the SoundDrive 16 software drivers (Chapter 7).

13. The system is ready for use.

Click here to continue

to the T.O.C......

Содержание 09-00232 Series




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды