Micronics 09-00232 Series, Руководство пользователя

Страница: 3 / 123

iii
Micronics Quick Installation
We know many experienced people prefer to read as little of the documenta-
tion as possible. If this sounds like you, here’s the short form:
1. Ground yourself to prevent damaging static discharge, then remove the
LPM30 from its packaging.
2. Check the voltage of your CPU and install a Power Module, if necessary.
See Chapter 2 for information on whether or not you will need a Power
Module.
Warning:
This system board has been factory set to support 5.0V processors. If
using a 3.3V or 4.0V processor, you must install a Power Module
(Appendix E). Failure to install a Power Module could result in
damage to the CPU.
3. Configure and verify the system board’s jumper settings. (See Jumper
Settings in Chapter 2)
4. Install the CPU and the system memory. (Chapter 3)
5. Install the motherboard into the system case and make all of the necessary
case connections.
6. Install a riser card (if needed). Install any peripherals or peripheral
cards. Connect the power cords, the monitor, the mouse, sound devices,
and any other external peripherals to the appropriate port (Chapter 3).
Do not replace the computer cover until you have verified the system is
working properly.