MICRO-EPSILON capaNCDT 6500, Инструкция по эксплуатации, Страница: 8 / 68

capaNCDT 6500 Page 8
Functional Principle, Technical Data
Ether
net/EtherCA
T
Display
230V
AC
100V
AC
Sensors
Sensor cables
Preamplifier
Demodulator DL 6510 Demodulator DL 6510 Demodulator DL 6510 Demodulator DL 6510 Demodulator DL 6530 Demodulator DL 6530 Demodulator DL 6530 Demodulator DL 6530
1 2 3 4 5 6 7 8
Connecting cables
Mains
± 15VDC P
ower
-
+ 5VDC supply
Oscillator
Ch 2 Ch 4 Ch 5 Ch 6 Ch 7 Ch 8
Signal output socket Sub-D, 37-pin
Ch 1 Ch 3
Fig. 2 Block diagram DT6530c (2 channels), block diagram DT6530 (8 channels)
2.2.1 Sensors
For this measurement system, several sensors can be used. In order to obtain accurate
measuring results, the surface of the sensor must be kept clean and free from damage.
The capacitive measuring process is area-related. A minimum area (see table) is re-
quired depending on the sensor model and measuring range. In the case of insulators
the dielectric constant and the target thickness also play an important role.
Sensors for metal targets
Sensor model Measuring range Min. target diameter
CS005 0.05 mm 3 mm
CS02 0.2 mm 5 mm
CS05 0.5 mm 7 mm
CS08 0.8 mm 9 mm
CS1 1 mm 9 mm
CS1HP 1 mm 9 mm
CS2 2 mm 17 mm
CS3 3 mm 27 mm
CS5 5 mm 37 mm
CS10 10 mm 57 mm
CSE05 0.5 mm 6 mm
CSE1 1 mm 8 mm
CSE2 2 mm 14 mm
CSG0,50-CAm2,0 0.5 mm ca. 7 x 8 mm
CSG1,00-CAm2,0 1 mm ca. 8 x 9 mm
CSH02 0.2 mm 7 mm
CSH05 0.5 mm 7 mm
CSH1 1 mm 11 mm
CSH1,2 1.2 mm 11 mm
CSH2 2 mm 17 mm
CSH02FL 0.2 mm 7 mm
CSH05FL 0.5 mm 7 mm
CSH1FL 1 mm 11 mm
CSH1,2FL 1.2 mm 11 mm
CSH2FL 2 mm 17 mm
CSH3FL 3 mm 24 mm