MICRO-EPSILON capaNCDT 6500, Инструкция по эксплуатации

Страница: 10 / 68

capaNCDT 6500 Page 10
Functional Principle, Technical Data
2.2.5 Controller Housing
The capaNCDT 6500 multichannel rack is constructed for up to eight channels, the
capaNCDT 6500C multichannel rack is constructed for up to two channels which are all
synchronized.
Power supply Display board
Demodulator
Fig. 5 Front view DT6530
Mains connection Ground connection
Fig. 6 Rear view DT6530
Fig. 7 Front view DT6530C
2.2.6 Oscillator
The oscillator supplies all measuring channels (sensors) with constant frequency- and
amplitude- stable alternating current. The frequency is 31 kHz. As all the sensors were
supplied by an oscillator, it comes not to an disturbing interference of the channels one
below the other. Every second measuring channel receives an oscillator signal phase
displaced by 180 °.
NOTICE
Output voltage can reach
up 14 VDC if there is no
sensor connected or
target out of measuring
range.