MICRO-EPSILON capaNCDT 6500, Инструкция по эксплуатации

Страница: 43 / 68

Ethernet Interface
capaNCDT 6500 Page 43
6.4.21 Query Data Port (GDP = Get Dataport)
Queries the port number of the data port.
Command $GDP<CRLF>
Response
$GDP<Portnumber>OK<CRLF>
Example: $GDP10001OK<CRLF>
6.4.22 Set Data Port (SDP = Set Dataport)
Sets the port number of the data port. Range: 1024 ...65535.
Command $SDP<Portnumber><CRLF> Example: $SDP10001OK<CRLF>
Response $SDP<Portnumber>OK<CRLF>
6.4.23 Access Channel Information (CHI = Channel info)
Reads channel-specific information (e.g. serial number of the display board).
Command $CHlm<CR>
Response $CHlm:ANO...,NAM...,SNO...,OFS...,RNG...,UNT...,DTY...OK<CRLF>
Index
m (Channel number): 1 - 8
ANO = Article number
NAM = Name
SNO = Serial number
OFS = Measuring range offset
RNG = Measuring range
UNT = Unit of measuring range (e.g. µm)
DTY = Data type of measuring values (1 = measuring value as INT,
0 = no measuring value)
6.4.24 Access Controller Information (COI = Controller info)
Reads information of the controller (e.g. serial number).
Command $COI<CR>
Response $COIANO...,NAM...,SNO...,OPT...,VER...OK<CRLF>
Index ANO = Article number
NAM = Name
SNO = Serial number
OPT = Option
VER = Firmware version
6.4.25 Login for Web Interface (LgI = Login)
Changes the user level for the web interface on
professional
.
Command $LGl<Password><CR>
Response $LGl<Password><OK>CRLF
Index Password = Password of the device. When delivered, no password is
assigned. The field can remain empty.
6.4.26 Logout for Web Interface (LGO = Logout)
Changes the user level for the web interface on
user
.
Command $LGO<CR>
Response $LGOOK<CRLF>