MGE UPS Systems GALAXY PW 100, Инструкция по установке и эксплуатации

Страница: 82 / 104

Display of Primary and Secondary Messages
The display is structured around primary and secondary messages, measuring tables and setting screens. As a rule,
the message displayed on the screen is always a primary one. The secondary messages, if any, are accessed by
pressing keys
9
▲
and 10
▼
. See Figure 2-6, page 2—8.
The presence of secondary messages is indicated by the arrow Ø at the end of the primary message. Return to
the primary messages is automatic if the keypad is not used for 2 minutes, or direct by pressing key 17 The display
screen lights up when a key is pressed, and goes off if no key is pressed for 5 minutes.
NOTE Most functions may be directly accessed. For example, when voltagemeasure-
ments are currently displayed, it is possible to directly access current
measurements by pressing the "A" button.
In addition to keypad operations, the graphical display brings up a window giving the overall device status. The
message displayed is then said to be primary (see list in the paragraph below). A primary message can be used to
access the measuring tables using keys
13 , 14 , 15 and 18 on the keypad The configuration screens can be
accessed by pressing key 12 .
A flashing arrow appears at the end of a primary message if there is a problem or an alarm. secondary messages
can be accessed by pressing key
9 on the keypad (see the list of secondary messages). The presence of another
message is indicated by the arrows Ø and ≠ at the end of the secondary message. They can be accessed by
pressing keys 9 and 10 on the keypad.
The return to the primary message is automatic after a 2 minute time delay or by pressing key 17 on the keypad.
IMPORTANT Select English U. S. as the display language to match the displays as presented
in this manual.
Galaxy PW ™ UPS 100 to 225kVA
Appendices A — 4 86-133060-00 A00