MGE UPS Systems GALAXY PW 100, Инструкция по установке и эксплуатации

Страница: 69 / 104

Installation and User Manual
4.14.1 Consulting Recorded Measurements
Recorded measurements are presented in the same manner (see below):
◗ the lists indicate the last 30 measurements recorded for the given parameter. The chronological order of
the measurements is indicated in the Figure opposite.
◗ the most recent measurement is presented first, in the upper left-hand corner of the list. The following
measurement is listed just below, and so on until the 30th value listed in the bottom right-hand corner of
the list.
◗ the period T between two successive measurements is 30 days. The displayed measurements are instan-
taneous values.
NOTE when this screen is selected, approximately ten seconds are required to call up
and display the information. If the number of measurements is greater than 30,
only the last 30 (the most recent) are displayed.
PARAMETER NAME (units) T=30 days
▼
last read: 05/09/1997
M(t+29T)|M(t+23T)|M(t+17T)|M(t+11T)|M(t+05T)
| | | |
M(t+28T)|M(t+22T)|M(t+16T)|M(t+10T)|M(t+04T)
| | | |
M(t+27T)|M(t+21T)|M(t+15T)|M(t+09T)|M(t+03T)
| | | |
M(t+26T)|M(t+20T)|M(t+14T)|M(t+08T)|M(t+02T)
| | | |
M(t+25T)|M(t+19T)|M(t+13T)|M(t+07T)| M(t+T)
| | | |
M(t+24T)|M(t+18T)|M(t+12T)|M(t+06T)| M(t)
Operation 4 — 21 86-133060-00 A00