MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
2.
Slide the hose onto the hose tail. Depending on the type of hose this can require a fair
amount of force.
Figure 19 – Hose fitted on to the hose tail
3.
Bring the hose clamp approximitly half-way over the hose tial for pinching. Pinch the hose
clamp according the manufacturers instruction and correct tooling.
Figure 20 - Pinchin of the hose clamp
4.
Hoses in place and secured. Pinch the hose clamp according the manufacturers instruction
and with appropriate tooling.
