MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
Figure 11 shows a complete connected battery system.
Figure 11 - Full connected series setup example
7.3
Thermal management
The battery module has fluid based thermal management capability. This is used to keep the battery
cells within a defined temperature window, which will improve performance and extend cycle life.
The fluid cooling also helps to prevent thermal propagation from a cell to adjacent cells inside a
battery module. When the batteries are kept at a stable temperature, the ambient temperature will
have less effect on the battery.
NOTICE:
The use of the fluid cooling system is mandatory in case of a marine project where
a class register is involved. It will add safety and will mitigate risks.
