Metz Clarea, Руководство по эксплуатации

Страница: 27 / 132

9.5.2 Setting the sat system, LNB supply voltage
The settings of the sat. antenna system must be reported to the TV set in the “DVB-S” menu.
It is essential that the settings are carried out in ascending sequence LNB supply voltage,
DiSEqC system …etc as shown in the right column.
LNB supply voltage
The LNB supply voltages are permanently set for selection of the polarisation (horizontal
H = 18V, vertical V = 14V). Normally, you do not need to carry out any change.
If the correct voltage supply of the LNB is no longer guaranteed as a result of a long antenna
cable, the supply voltage can be increased by 1V with the line compensation.
If changes are necessary, please take the following setting steps into
consideration.
Changing the settings:
• Press button to open the "Functional overview".
• Select "Menu" with the cursor and press the button.
• Select "DVB-S" with the cursor and press the button.
• Select "Aerial facility" and "LNB supply voltage" with the cursor in the context menu and
press the button.
• Select LNBsupply in the context menu, choose on or off with the cursor and press the
button.
If the TV set is connected to a "single cable SAT system", the LNB supply voltage must
always be set to “Off”.
+
Radio Portal PVR Archive TV
Functional overview 20:10
Music Photos Videos
Analogue Network USB HDMI
Filemanager Remove USB Device Manual
Parental control
Menu
Autom. On/Off
■ MANUAL
Network AV devices Sound Picture
Menu 20:10
Radio station list TV station list
Subtitle Service Parental control
Recordings/EPG
DVB-T Analog-TV DVB-C
DVB-S
■ MANUAL
OK
OK
Configuration
OK
DVB-S
O
PERATION LEVEL
H H H
DVB-T
BACK
Aerial facility
Astra 19,2°
Hot Bird 13°
Automatic search
Manual search
General settings
Antenna normal
Power compensation Aus
LNB supply voltage Ein
DiSEqC system off
■ MANUAL ■ EXPERT ■ COMFORT ■ SIMPLE
EXIT
Aerial facility DVB-S
DVB-S
LNB supply voltage
Ein
off
on
27