Metz Clarea, Руководство по эксплуатации

Страница: 121 / 132

38 Cleaning the device
Switch off the device with the power switch before cleaning !
Improper handling and cleaning can cause irreparable
damage to the screen. Consequently, pay attention to the
rules on handling and caring for the device.
• Handle the screen surface very carefully and gently.
• Avoid any mechanical stress to the screen surface by knocking,
shocks, pressure, scratching, scraping, etc, since this can lead to
damage.
• Avoid contact with pointed, sharp or hard objects.
• The screen surface must be preserved against dirt.
Care and cleaning:
Switch off and unplug the device before cleaning.
Take care that water or other liquids never gets into the device,
since these can cause damage to the device.
Unplug the set immediately if foreign bodies like water, other
liquids, metal parts, etc get into the screen.
Never attempt to touch the inside of the set with any objects
or with your hands. Danger of electric shock or accident.
• Cleaning of the screen surface must occur with a soft, dry cleaning
cloth (e.g. microfibre cloth).
• If significant soiling nevertheless occurs, the screen surface can
be cleaned with a slightly moist, soft cloth.
A special TFT cleaning solution (commercially available at
specialised dealers) is the perfect cleaning solution.
+
1920x1080p 60 Hz
HDMI Audio:
Linear PCM Stereo 32kHz/ 44.1kHz/ 48kHz
EURO1
RGB IN: 576i 50Hz, 480i 60Hz
Y/C IN: PAL 576i 50Hz, NTSC 480i 60Hz
FBAS (CVBS) IN: PAL 576i 50Hz, NTSC 480i 60Hz, SECAM 576i
50Hz, PAL 60
Audio IN: Analog Stereo (Line-IN)
Audio OUT: Analog Stereo (Line-OUT)
DIGITAL AUDIO OUT
SPDIF (Linear PCM Stereo or
Dolby Digital, depending on source)
AUDIO OUT
Analogue Stereo (Line-OUT)
Front AV
FBAS (CVBS) IN: PAL 576i 50Hz, NTSC 480i 60Hz, SECAM
576i 50Hz, PAL 60
Audio IN: Analogue Stereo (Line-IN)
Haedphone OUT
: Headphone impedance ≥ 32 Ohm
HD
T
V
121
Errors excepted. Subject to changes !