metrotek Bercut-ET, Руководство по эксплуатации

Страница: 109 / 116

109
Table B.3. Remote control commands (TELNET). Configuration mode (continued)
rfc2544 throughput maxrate text
set maximum rate value for the
throughput analysis
rfc2544 latency enabled no/yes enable/disable latency analysis
rfc2544 latency count text
set number of trials for the latency
analysis
rfc2544 latency duration text
set trial duration for the latency
analysis
rfc2544 frameloss enabled no/yes enable/disable frameloss test
rfc2544 frameloss duration text
set trial duration for the frameloss
test
rfc2544 backtoback enabled no/yes enable/disable back-to-back analysis
rfc2544 backtoback count text
set number of trials for the back-to-
back test
rfc2544 backtoback duration text
set trial duration for the back-to-
back test
BERT
bert header src mac XX:XX:XX:XX:XX:XX set source UDP-port number
bert header src ip i.i.i.i set source IP address
bert header src udp text set source UDP-port number
bert header dst mac XX:XX:XX:XX:XX:XX set destination MAC address
bert header dst ip i.i.i.i
set destination IP address
bert header dst udp text set destination UDP-port number
bert header vlan enabled off/on enable/disable VLAN parameter
bert header vlan id text set VLAN identifier
bert header vlan priority text set traffic priority
bert header precedence text set frame priority
bert header tos 0000 / 1000 / 0100 / 0010 / 0001 set type of service for the packet
bert topology port tx a/b set data transmitting port
bert topology port rx a/b set data receiving port
bert level 1/2/3/4
layer of OSI model at which BERT
will be performed
bert pattern user / crtp / 2e11-1 / 2e15-1 / 2e20-1 /
2e23-1 / 2e29-1 / 2e31-1
select standard or user-defined test
pattern
bert user-pattern hex set user-defined test pattern
bert frame int set user-defined frame size
bert rate int set user-defined rate (Kbps)
bert duration hh.mm.ss set trial duration for BERT
Packet jitter
jitter port a/b
select port on which jitter measure-
ments will be performed
jitter threshold int set threshold (ms)
jitter duration hh.mm.ss set measurements duration
Bercut-ET. Operations manual