metrotek Bercut-ET, Руководство по эксплуатации

Страница: 107 / 116

107
Table B.2. Remote management commands (TELNET). Show mode (continued)
bert stop
stop BERT
bert show show BERT results
Packet jitter
show jitter port on which port jitter measurements will be performed
show jitter threshold threshold (ms)
show jitter duration measurements duration
jitter start start Packet jitter test
jitter stop stop Packet jitter test
jitter show
Packet jitter test results
Test traffic
show txgen header src mac source MAC address
show txgen header src ip source IP address
show txgen header src udp source UDP-port number
show txgen header dst mac destination MAC address
show txgen header dst ip destination IP address
show txgen header dst udp destination UDP-port number
show txgen header vlan enabled
show whether VLAN parameter is enabled
show txgen header vlan id VLAN identifier value
show txgen header vlan priority traffic priority value
show txgen header precedence frame priority value
show txgen header tos type of service for the packet
show txgen port transmitting port
show txgen frame user-defined frame size
show txgen duration trial duration
show txgen rate user-defined rate (Kbps or %)
txgen start start test traffic generating
txgen stop stop test traffic generating
txgen show show test traffic results
Interface setup
show gbe a speed show transmission rate for the port A
show gbe b speed show transmission rate for the port B
Network setup
show network a dhcp
show whether the DHCP function is enabled for the
port A
show network a ip show IP address of the port A
show network a subnetmask show subnet mask for the port A
show network b dhcp
show whether the DHCP function is enabled for the
port B
show network b ip show IP address of the port B
show network b subnetmask show subnet mask for the port B
Bercut-ET. Operations manual