Metrohm Titrino 719 S, Инструкция по эксплуатации

Страница: 28 / 152

2.6. Selection of the mode, key <MODE>
719 S Titrino
24
2.6 Selection of the mode, key <MODE>
Press key <MODE> until the desired mode is
displayed and confirm with <ENTER>.
Select the measured quantity pH, U, Ipol, Upol, (T) with
<SELECT> and confirm it also with <ENTER>.
The following modes can be selected:
•
SET: S et E ndpoint T itration.
•
CAL: pH Cal ibration.
•
MEAS: Meas uring.
These standard modes are loaded with a set of default
parameters and are ready to work (only with SET an
end point has to be set).
MODE
–
>
;