manualshive.com logo in svg

Met One E-BAM, Руководство по эксплуатации

Поделиться
Скачать
Met One E-BAM Скачать руководство пользователя страница 64

 

E-BAM-9805 Manual Rev B.docx 

Page 64 

 

8  SPECIAL E-BAM CONFIGURATIONS 

The E-BAM can be supplied in custom configurations or with non-standard accessories in order to 
meet specific monitoring needs. 

8.1  Wind Sensor Options 

The E-BAM can be equipped with an optional combination wind speed and direction sensor. There 
are both analog and sonic type sensors available. 

8.1.1  EX2-034B 

The EX2-034B is a mechanical cup and vane sensor that provides wind speed and direction 
measurements. It is mounted to the E-BAM tripod using the provided cross arm. See Figure 2-4. 

It connects to the E-BAM WS/WD SENSOR connector using the included signal cables and analog 
to digital signal converter.  This converter measures the wind sensor’s analog signals and provides 
an RS-485 digital output to the E-BAM with wind speed and direction values. 

This type of sensor requires manual orientation when deployed. Consult the separate manual that 
comes with the wind sensor for details. 

8.1.2  EX2-AIO 

The EX2-AIO sensor provides sonic wind measurements. It is mounted using the same cross-arm 
assembly as shown for the EX2-034B in Figure 2-4. However, it has a different adapter to mate it to 
the cross-arm itself. 

It connects to the E-BAM through the WS/WD SENSOR connector on the bottom of the monitor. 
This connection both provides power to the sensor and collects its digital output string to provide 
wind speed and direction information. 

This type of sensor includes an internal compass for wind direction correction and does not require 
manual orientation when deployed. Consult the separate manual that comes with the wind sensor 
for details. 

Содержание E-BAM

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды