Met One E-BAM, Руководство по эксплуатации

Страница: 31 / 64

E-BAM-9805 Manual Rev B.docx Page 31
3.6.11 Serial Port
This is where the serial communication settings
are configured. The baud rate options are 1200,
2400, 4800, 9600, 19200, 38400, 57600, and
115,200
Press the green bordered value box and a list of
the settings available will be displayed.
Section 6 has more details about serial
communications. Figure 3-34 The Serial Port Screen
3.6.12 Modbus
This menu is used to select the active slave
Modus Port: RS-232 or RS-485.
The port is accessed from the bottom panel
(Figure 6-1).
Select the slave Modbus address. Each slave
must have a unique address from 1 to 247.
Figure 3-35 The Serial Port Screen
3.6.13 Sound Volume
The touchscreen will beep every time a selection
is made. The volume of that beep may be
adjusted in this screen. Press the green
bordered value box and the numerical entry
keypad (Figure 3-5) will be displayed.
The volume range is 0
– 100 with 100 being very
loud and 0 being no beep at all.
Figure 3-36 The Sound Volume Screen
3.6.14 Touch Calibrate
This screen allows for calibration of the
touchscreen. Press the grey Calibrate button to
begin and then simply follow the instructions on
the screen to calibrate it.
If each step is not completed within five seconds,
the test will cancel itself and return to page two of
the Setup menu.
Figure 3-37 The Touch Calibrate Screen
There is a countdown clock for this feature displayed on each step of the calibration process.