P 8
Please retain product label and instructions for future reference
Left Handed
Pre drill
hole
Step 6 -
Left Handed
Parts Needed - No. 22 QTY 1
No. 32 QTY 1
No. 36 QTY 1
No. 40 QTY 2
No. 41 QTY 1
No. 83 QTY 2
Place the starter boards (
No. 22, 32 & 40)
on to the assembled base frame and place the first four log boards
(No.36, 41 & 83)
sitting in the notches as shown.
Ensure the boards sit square on the base using the same method used in Step 1. Measure from corner to
corner and ensure they are equal in measurement.
Once the boards are square, fix the starter boards (
No. 22, 32 & 40)
in place, lift up the log boards
(No.36,
41 & 83)
and fix each starter board in place using 1x70mm screw per notch.
Fix the log boards to the starter boards by screwing through the notch into the frame with 1x70mm screw
as shown in the illustration.
Secure boards
(No.83)
in place by screwing at an angle through the side of the log board into the end of the
starter boards
(No.40 & 32)
next to them
,
as shown in the illustration.
8x70mm Screws
70mm
screw
IMPORTANT:
Pre-drill before fixing screws.
40
36
22
41
32
83
83
40
Right Handed
40
36
22
40
32
41
83
83
*Ensure boards sit flush
Rubber Mallet
may be required
to fit parts.
Pre drill
hole
Step 6 -
Right Handed
Parts Needed - No. 22 QTY 1
No. 32 QTY 1
No. 36 QTY 1
No. 40 QTY 2
No. 41 QTY 1
No. 83 QTY 2
Place the starter boards (
No. 22, 32 & 40)
on to the assembled base frame and place the first four log boards
(No.36, 41 & 83)
sitting in the notches as shown.
Ensure the boards sit square on the base using the same method used in Step 1. Measure from corner to
corner and ensure they are equal in measurement.
Once the boards are square, fix the starter boards (
No. 22, 32 & 40)
in place, lift up the log boards
(No.36,
41 & 83)
and fix each starter board in place using 1x70mm screw per notch.
Fix the log boards to the starter boards by screwing through the notch into the frame with 1x70mm screw
as shown in the illustration.
Secure boards
(No.83)
in place by screwing at an angle through the side of the log board into the end of the
log boards
(No.41 & 36)
next to them
,
as shown in the illustration.
8x70mm Screws
70mm
screw
Rubber Mallet
may be required
to fit parts.
IMPORTANT:
Pre-drill before fixing screws.
22
32
22
32
41
40
83
*Ensure boards sit flush
83
40
41