P 29
Please retain product label and instructions for future reference
Step 50
Parts needed - No. 68
Measure and cut the remaining
felt
(No.68)
using the dimensions
given below.
Lay the fist strip
(1-3600mmX200mm)
onto the
roof as shown
(1)
, ensuring it is
overlapping the previously placed
sheets.
Continue this method for each of
the felt strips
(2-4)
Secure along the outer edge of
each felt section using felt tacks
spaced out at approximately
100mm intervals.
250x Felt Tacks
HANDLE
WITH CARE
1
2
3
4
Felt
tacks
1.
2.
3.
4.
Felt strip dimensions:
1 - 3600mm (L) x 200mm( W)
2 - 2340mm (L) x 200mm (W)
3 - 1700mm (L) x 200mm (W)
4 - 1720mm (L) x 200mm (W)
IMPORTANT:
Pre-drill before fixing screws.
65
62
Step 51
Parts needed - No. 62 QTY 1
No. 63 QTY 1
No. 64 QTY 4
No. 65 QTY 2
Attach the fascias (
No.62, 63, 64 & 65)
around the log cabin, ensuring to trap the felt between
the fascia and the log cabin.
Once in place, mark the excess fascia with a pencil and then trim the fascias to follow the shape
of building as shown in the illustration.
Secure the fascias into position using 40mm screws, ensuring to screw through the fascia into
the roof purlin and/or log boards.
46x40mm Screws
Pre drill
hole
40mm
screw
63
64
64
65
65
65
62
64
64
64
