P 11
17a
Pre drill
hole
30mm
screw
9
10
17
Step 11
Parts Needed - No. 9 QTY 1
No. 10 QTY 1
No. 17 QTY 9
No. 75 QTY 1
The Adjustable Door Hinge
(No.17)
comes in three parts.
Fasten No. 17a into 17b as shown in
the illustration.
Once the roof is fixed,
place the
master and secondary doors
(No.9 &
10)
and the Fully boarded single door
(No.75)
onto a flat surface.
Fix 3 x Adjustable door hinges
(No.17c)
to each door using 3x30mm
screws per hinge.
Fix 3 x Adjustable Door Hinges
(No.
17a&b)
into position onto each door
frame using 4x30mm screws per
hinge.
*Ensure the hinges are fitted to the
external of the door frame so the
doors open outwards from the log
cabin.
Locate the doors into the hinges Place
the doors on the hinges ensuring
there is equal spacing on each side
between the door and door frame, and
the doors open & close freely without
restriction.
It is important to fit the doors within
the frames at this stage so that you can
establish the position of the hinges.
The hinges come in three parts.
Remove th doors from the frme after
fitting.
*Ensure to screw into the framing and
not into the channel.
63x30mm Screws
a
b
17b
a
b
b
17
75
IMPORTANT:
Pre-drill before fixing screws.
17a
Step 12
To adjust and align your doors:
1. Lift up the doors to separate the two
parts fo the hinge.
2. Turn the rotating barrel
(No.17a)
in /
out to move the postion of the doors
either in or away from each other.
3. You can then place the door(s) back
on to the hinge and check the whether
they require more / less adjustments, if
further adjustments are required repeat
number 2.
Step 13
Once you have laid 6 log boards (
off of the starter
)
up the door section, slide the assembled door
frames over the boards resting the frame on top
of the starter board
(if you have not yet assembled the door frames
refer to steps 9 &10)
*Please note:
This image is for illustrative purposes
and may differ from your choice in product
(
regarding door position
). Nevertheless the
process of fitting the door frame is the same.
Please retain product label and instructions for future reference
