P 13
Please retain product label and instructions for future reference
Pre drill
hole
30mm
screw
1
7
7
7
IMPORTANT:
Pre-drill before fixing screws.
Step 16
Parts Needed - No. 1 QTY 2
No. 7 QTY 4
Position the window
(No. 1)
so that it
sits centrally within the window
frame. Fix the female part of the flag
hinge
(No. 7)
to the window using
4x30mm screws, attach the male part
of the flag hinge
(No. 7)
to the
window frame using 4x30mm screws
ensuring that the window can open
and close freely.
Repeat this method for both windows
It is important to fit the windows
within the frame at this stage so that
you can establish the position of the
hinges. The hinges came in two parts.
Remove the widnows from the frame
after fitting.
*Ensure to attach the hinge to the
horizontal frame of the window*
32x30mm Screws
Step 17
Once you have laid the second level of
boards onto the log cabin slide the
windows between the smaller boards
and rest on to the longer board
(if you
have not yet assembled the window
frames refer to step 13)
*Ensure the boards are level with each
end.
*Please note:
This image is for illustrative
purposes and may differ from your choice
in product (
regarding window position
).
Nevertheless the process of fitting the
window is the same
Step 18
Parts needed - No. 23 QTY 6
No. 24 QTY 5
No. 29 QTY 12
No. 30 QTY 6
No. 31 QTY 6
Lay the next layer of boards (
No. 23, 24, 29, 30, 31, 41, 83, 86 & 87
) onto the log cabin, following the method
as shown in the illustration, bringing the board level to the top of the window and door frames.
Please note when you get to the top of the boards the right hand boards will be slightly lower, and the
shed area boards will be slightly higher.
**Ensure that the boards are level and flush with each other as you lay each one.
Ensure the boards
(No.83 & 87)
are level, flush and in line with the boards next to them.
Secure every other board
(No. 83 & 87)
in place by screwing through the side of the board at an angle into the
end of the board next to it
(No. 41 & 29)
, using 1x60mm screw per board.
6x60mm Screws
Left Handed
Right Handed
23
41
29
83
87
86
41
41
83
87
86
41
41
29
29
41
23
24
30
31
29
30
31
Rubber Mallet
may be required
to fit parts.
24
Pre drill
hole
80mm
screw
No. 41 QTY 18
No. 83 QTY 6
No. 86 QTY 7
No. 87 QTY 7
IMPORTANT:
Pre-drill before fixing screws.