P 28
Please retain product label and instructions for future reference
IMPORTANT:
Pre-drill before fixing screws.
Roof
Closure Trim
Internal
67
*Measure and cut the
closure trims to
fit the internal space.
Pre drill
hole
30mm
screw
*
trim to fit
Step 47
Parts needed - No. 67 QTY 12
Inside the building place the closure
trim (
No. 67
) against the boarding and
align with the roof as shown in the
illustration.
*Measure and cut the closure trims to
fit the internal space.
Once in position fix each trim into
place by pre drilling a pilot hole and
using 6x30mm screws per trim,
equally spacing them along the face
of the board.
72x30mm Screws
IMPORTANT:
Pre-drill before fixing screws.
*Internal view
67
67
30mm
screw
Pre drill
hole
*
Cut to fit
Step 48
Parts needed - No. 67 QTY 12
Once the floor has been laid arrange the
closure trim (
No. 67
) around the outside
edge of floor (
internally
), measure and cut
down accordingly to best match the
internal space.
Secure each trim section into place using
6x30mm spaced equally along the board
as shown in the illustration.
*Do NOT fix the closure trim to the floor
boards.
72x30mm Screws
HANDLE
WITH CARE
1
2
3
4
Felt
tacks
1.
3.
2.
4.
5.
6.
7.
8.
Felt sheet dimensions:
1 - 3600mm (L) x 1000mm (W)
2 - 2300mm (L) x 1000mm (W)
3 - 1655mm (L) x 1000mm (W)
4 - 5160mm (L) x 1000mm (W)
5 - 3600mm (L) x 1000mm (W)
6 - 620mm (L) x 1000mm (W)
7 - 790mm (L) x 1000mm (W)
8 - 4300mm (L) x 1000mm (W)
Step 49
Parts needed - No. 68
Measure and cut the felt
(No.68)
using the dimensions given below as
a guide.
Lay the frst piece of felt
(1-3600mmX1000mm)
onto the
roof as shown
(1)
and cut down to
the individual shape of the roof.
Continue this method for each piece
of felt
(2-8)
in the order as shown,
ensuring a 50mm overlap between
each piece.
Secure along the outer edge of each
felt section using felt tacks spaced
out at approximately 100mm
intervals.
*Ensure there is 50mm of
overhanging felt around the base
of the roof.
600x Felt Tacks
