P 26
Please retain product label and instructions for future reference
IMPORTANT:
Pre-drill before fixing screws.
Step 43
Parts Needed - No. 18 QTY 1
No. 19 QTY 1
No. 20 QTY 1
Fit the Mortice lock (
No. 19
) into the
recess in the master door (
No. 9
) and secure
using the screws provided. Attach the Key
plate (
No. 20
) to the secondary door (
No. 10
)
with 4x30mm screws.
Fit the door handles (
No. 18
) and
connect with the metalbar to the mortice
lock using 8x30mm screws. Ensure the lock
mechanism closes correctly. If not, remove
the lock and turn the catch around using
the small grub screw.
*Please note:
This image is for illustrative
purposes and may differ from your choice in
product (
regarding ironmongery
). Neverthe-
less the process of fixing the frames is the same.
Once components have been fitted, try closing
doors to ensure the doors can be closed and
the lock works.
If your doors do need adjusting please look at
step 20 if not proceed to the next step.
12x30mm Screws
Pre drill
hole
a
b
30mm
screw
The Mortice Lock is Reversible
a
b
20
19
10
9
18
IMPORTANT:
Pre-drill before fixing screws.
Step 44
Parts Needed - No. 81 QTY 1
No. 82 QTY 1
No. 20 QTY 1
Fit the Dead Lock (
No. 81
) into the
recess in the boarded door (
No. 75
) and
secure using the screws provided. Attach the
Key Plate (
No. 20
) to the door framing with
the screws provided.
Fit the Door Handle (
No. 82
) to the
front of the door using 4x30mm screws as
shown in the illustration.
*Please note:
This image is for illustrative
purposes and may differ from your choice in
product (
regarding ironmongery
).
Nevertheless the process of fixing the door(s) is
the same.
Once components have been fitted, try closing
doors to ensure the doors can be closed and
the lock works.
If your doors do need adjusting please look at
step 20 if not proceed to the next step.
12x30mm Screws
a
a
b
b
82
20
81
Pre drill
hole
30mm
screw