Mercedes-Benz Sprinter 2019, Руководство по эксплуатации

Страница: 125 / 298

Raising and lowering the vehicle level
By remote control
Electronic level control performs a self-check reg‐
ularly when it is activated and while in use. Indi‐
cator lamp 1 on the remote control lights up for
approximately one second when you switch on
either the ignition or electronic level control with
button 4 .
There is a malfunction if indicator lamp 1
behaves in the following ways:
R
the indicator lamp does not light up when you
switch on the ignition or electronic level con‐
trol
or
R
the indicator lamp does not go out after one
second
or
R
the indicator lamp then lights up again or
flashes
In addition, a warning tone is emitted from the
remote control for approximately 30 seconds.
The malfunction that has been detected can be
shown using the indicator lamps (signaling of
malfunction codes).
#
Park the vehicle, leaving the ignition switched
on.
#
To raise or lower the vehicle level: press
and hold button 2 or 3 until the vehicle
level reaches the required height.
The indicator lamp on button 2 or 3
flashes as long as the vehicle level is being
changed. When the vehicle level has been set,
the indicator lamp on button 2 or 3 lights
up.
#
To lower automatically: briefly press button
3 .
Electronic level control automatically lowers
the vehicle down to the lowest position.
The indicator lamp on button 3 flashes as
long as the vehicle level is being changed.
When the vehicle level has been set, the indi‐
cator lamp on button 3 lights up.
#
To stop the movement, briefly press button
2 .
#
To raise or lower to driving level: briefly
press button 2 or 3 .
Electronic level control automatically raises or
lowers the vehicle to driving level.
The indicator lamp on button
2 or 3
flashes as long as the vehicle level is being
changed. When the vehicle level has been set,
the indicator lamp on button 2 or 3 lights
up.
#
To stop the movement, briefly press the other
button.
#
To save the set vehicle level: set the
required vehicle level.
#
Press and hold button 5 or 6 until you hear
a tone.
The vehicle level set has been saved on corre‐
sponding button 5 or 6 .
#
To call up the saved vehicle level: briefly
press button 5 or 6 .
Electronic level control automatically raises or
lowers the vehicle to the saved driving level.
The indicator lamp on button
5 or 6
flashes as long as the vehicle level is being
changed. When the vehicle level has been set,
the indicator lamp on button 5 or 6 lights
up.
#
To stop the movement, briefly press button
2 or 3 .
#
To switch on automatically: drive at over
6.2 mph (10 km/h) or release the parking
brake.
Electronic level control controls the vehicle
level automatically.
#
To stop the movement, briefly press button
2 or 3 .
Switching electronic level control off/on
#
To switch electronic level control off:
press button 4 .
The indicator lamp on button 4 lights up.
#
To switch electronic level control on
again: press button 4 again.
The indicator lamp on button 4 goes out.
Driving and parking 123