#
Before parking the vehicle, apply the
parking brake.
#
Press the brake pedal and the DIRECT
SELECT lever upwards or downwards to the
first point of resistance.
Transmission position display
i
is shown in
the multifunction display.
Releasing the brake pedal will allow you to move
the vehicle freely, e.g. to push it or tow it.
If the automatic transmission should also
stay in neutral
i
i
when the ignition is
switched off, carry out the following:
#
Start the vehicle.
#
Depress the brake pedal and shift to neutral
i
.
#
Release the brake pedal.
#
Switch off the ignition.
%
If you then leave the vehicle and the Smart‐
Key is still in the vehicle, the automatic trans‐
mission will stay in neutral
i
from then on.
Engaging park position P
#
Press button
1
.
Transmission position display
j
is shown in
the multifunction display.
Park position
j
is engaged automatically when
one of the following conditions is met:
R
You switch off the engine in transmission
position
h
or
k
.
R
You open the driver's door when the vehicle is
stationary or when driving at a very low speed
and in transmission position
h
or
k
.
R
You open the seat belt buckle when the vehi‐
cle is stationary or when driving at a very low
speed.
R
You leave your seat when the vehicle is sta‐
tionary or when driving at a very low speed.
Engaging drive position D
116 Driving and parking
Содержание Sprinter 2019
Страница 7: ......
Страница 11: ...NJ Brakes yellow 268 O ABS malfunctioning 268 P ESP deactivated 268 At a glance Instrument cluster 9...
Страница 19: ...ASpare wheel example 227 At a glance Emergencies and breakdowns 17...
Страница 298: ......