Mercedes-Benz Sprinter 2019, Руководство по эксплуатации

Страница: 242 / 298

Oil change interval
The on-board computer automatically shows the
date of the next oil change as an event message
on the display.
Mercedes-Benz recommends having the oil
changed at a qualified specialist workshop.
Engine oil capacities
Engine Engine oil
M274 Approx. 11.2 qt
(10.5 liters)
OM642 Approx. 13.2 qt
(12.5 liters)
OM651 (rear wheel
drive)
Approx. 12 qt
(11.5 liters)
Information on oil consumption
Depending on the driving style, the vehicle con‐
sumes a maximum of 1.1 US qt (1.0 liter) of
engine oil per 620 miles (1000 km).
In the following cases, oil consumption may also
exceed this limit:
R
The vehicle is new.
R
You use the vehicle mostly under arduous
conditions.
R
You drive frequently at a high engine speed.
Regular maintenance is a prerequisite for favora‐
ble consumption figures. You can only assess the
oil consumption after a long journey. Check the
oil level in the engine regularly, e.g. weekly or
every time you refuel.
Notes on brake fluid
Observe the notes on operating fluids
(
→
page 234).
&
WARNING Risk of an accident due to
vapor pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking effect to be impaired.
#
Have the brake fluid renewed at the
specified intervals.
* NOTE Damage to paint, plastic or rubber
by brake fluid
There is a risk of damage to property if brake
fluid comes into contact with paint, plastic or
rubber.
#
If paint, plastic or rubber comes into
contact with brake fluid, rinse with
water immediately.
Observe the notes on paintwork/matte finish
paintwork care (
→
page 183).
Have the brake fluid replaced regularly at a quali‐
fied specialist workshop.
Only use brake fluid approved by Mercedes-Benz
in accordance with MB-Freigabe or MB-Approval
331.0.
Further information on brake fluid:
R
in the MB Specifications for operating fluids
at http://bevo.mercedes-benz.com
R
at a qualified specialist workshop
Coolant
Notes on coolant
Observe the notes on operating fluids
(
→
page 234).
& WARNING ‑ Risk of fire and injury from
antifreeze
If antifreeze comes into contact with hot com‐
ponent parts in the engine compartment, it
may ignite.
#
Allow the engine to cool down before
adding antifreeze.
#
Make sure that no antifreeze spills out
next to the filler opening.
#
Thoroughly clean off any antifreeze from
component parts before starting the
vehicle.
* NOTE Damage caused by incorrect cool‐
ant
#
Only add coolant that has been pre‐
mixed with the required antifreeze pro‐
tection.
240 Technical data