Mercedes-Benz Mercedes-AMG GT 2015, Руководство пользователя

Страница: 279 / 317

The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporta-
tion.
X
Insert the key into the ignition lock. You
must use the key instead of the Start/Stop
button (
Y
page 122).
X
Start the engine and leave it running during
the entire loading operation.
X
Move the transmission to position N with
the E-SELECT lever.
X
Check the transmission position using the
indicator in the multifunction display
(
Y
page 131).
As soon as the vehicle is loaded:
X
Safeguard the vehicle against rolling away
by applying the electric parking brake.
X
Shift the automatic transmission to posi-
tion P.
X
Turn the key to position 0 in the ignition
lock and remove it.
X
Secure the vehicle.
Tow-starting (emergency engine
starting)
!
Do not tow-start vehicles with automatic
transmission. You could otherwise damage
the automatic transmission.
i You can find information on "Jump-start-
ing" under (
Y
page 271).
Electrical fuses
Important safety notes
G WARNING
If you manipulate, bridge or replace a faulty
fuse with a fuse of a higher amperage, the
electric cables could be overloaded. This may
result in a fire. There is a risk of an accident
and injury.
Always replace faulty fuses with specified new
fuses of the correct amperage.
Blown fuses must be replaced with fuses of
the same rating, which you can recognise by
the colour and fuse rating. The fuse ratings
are listed in the fuse allocation chart.
The fuse allocation chart is on the fuse box in
the luggage compartment (
Y
page 277).
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified spe-
cialist workshop, e.g. a Mercedes-Benz Ser-
vice Centre.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or sys-
tems could be damaged.
The fuses in your vehicle disconnect faulty
circuits. If a fuse blows, all the components on
the circuit and their functions will fail.
Before replacing a fuse
X
Safeguard the vehicle against rolling away
(
Y
page 140).
X
Switch off all electrical consumers.
X
Open the driver's door.
The on-board electronics now have status
0. This is the same as the key having been
removed.
or, if the key is inserted in the ignition lock:
X
Remove the key from the ignition lock.
All indicator lamps in the instrument cluster
must be off.
The fuse allocation chart is with the wheel-
change tool kit in the luggage compartment.
Fuse box in the front-passenger foot-
well
! Make sure that no moisture can enter the
fuse box when the cover is open.
!
The floor panel must be fitted properly,
otherwise moisture or dirt could impair the
function of the fuses.
276
Electrical fuses
Breakdown
assistance