Mercedes-Benz Mercedes-AMG GT 2015, Руководство пользователя

Страница: 278 / 317

Deactivate the automatic locking feature
before the vehicle is towed away (
Y
page 74).
You could otherwise be locked out when
pushing or towing the vehicle.
Deactivate tow-away protection before the
vehicle is towed away (
Y
page 62).
Fitting/removing the towing eye
Fitting the towing eye
The bracket for the screw-in towing eye is
behind the radiator trim.
X
Remove the towing eye from the vehicle
tool kit (
Y
page 263).
X
Fold cover : out and leave it to hang from
the retaining strap.
X
Lever off the cover behind it using a flat tool
and fold it out.
X
Screw in the towing eye clockwise to the
stop.
Removing the towing eye
X
Loosen the towing eye and unscrew it.
X
Fold down the inner cover until it engages.
X
Attach cover at the bottom and press it in at
the top until it engages.
X
Put the towing eye back into the vehicle
tool kit.
Towing the vehicle with both axles on
the ground
It is important that you observe the safety
instructions when towing away your vehicle
(
Y
page 273).
The automatic transmission automatically
shifts to position P when you open the driver's
or front-passenger door or when you remove
the key from the ignition lock. In order to
ensure that the automatic transmission stays
in position N when towing away the vehicle,
you must observe the following points:
X
Insert the key into the ignition lock. You
must use the key instead of the Start/Stop
button (
Y
page 122).
X
Start the engine and leave it running during
the entire towing procedure.
X
Depress the brake pedal and keep it
depressed.
X
Move the transmission to position N with
the E-SELECT lever.
X
Check the transmission position using the
indicator in the multifunction display
(
Y
page 131).
X
Release the brake pedal.
X
Release the electric parking brake.
X
Switch on the hazard warning lamps
(
Y
page 100).
In order to signal a change of direction when
towing the vehicle with the hazard warning
lamps switched on, use the combination
switch as usual. In this case, only the turn
signals for the desired direction flash. When
you reset the combination switch, the hazard
warning lamps start flashing again.
Transporting the vehicle
! You may only secure the vehicle by the
wheels, not by parts of the vehicle such as
axle or steering components. Otherwise,
the vehicle could be damaged.
Towing away and tow-starting
275
Break
dow
n
ass
is
tanc
e
Z