Mercedes-Benz Mercedes-AMG GT 2015, Руководство пользователя

Страница: 276 / 317

X
First, remove the jump leads from earth point ? and negative terminal = , then from pos-
itive clamp : and positive terminal ; . Begin each time at the contacts on your own vehicle
first.
X
Close cover A of positive clamp : after removing the jump leads.
Vehicles with carbon engine cover:
X
Replace the jump-starting connection point cover. Make sure all mountings for the fasteners
are positioned precisely under the corresponding recesses in the cover.
X
Press fasteners into the mountings until they engage.
All vehicles:
X
Have the battery checked at a qualified specialist workshop.
Jump-starting is not considered to be a normal operating condition.
i
Jump-starting cables and further information regarding jump starting can be obtained at
any qualified specialist workshop.
Towing away and tow-starting
Important safety notes
G WARNING
The rear axle locks when:
R
the engine is not running
R
the engine stalls while the vehicle is being
towed
R
there is a malfunction in the voltage supply
or the vehicle's electrical system
There is a risk of an accident.
In the event of a breakdown, you should
always have the vehicle transported.
G WARNING
If the brake system or power steering is mal-
functioning and your vehicle is then towed
away, significantly more effort may be
required to steer and brake than is normally
required. There is a risk of an accident.
In such cases use a rigid towing bar. Before
towing away, make sure steering moves
freely.
G WARNING
When towing or tow-starting another vehicle
and its weight is greater than the permissible
gross weight of your vehicle, the:
R
towing eye may be torn off
R
car/trailer combination may swerve or
even overturn
There is a risk of an accident.
When towing or tow-starting another vehicle,
its weight should not be greater than the per-
missible gross weight of your vehicle.
! Use the key instead of the Start/Stop
button when towing the vehicle.
Start the engine and keep it running. Turn
the key to position 2 in the ignition. Set the
transmission to N using the E-SELECT
lever. Make sure that you then leave the
key in position 2.
Check the transmission position in the
instrument cluster.
! Make sure that the electric parking brake
is released. If the electric parking brake is
faulty, visit a qualified specialist workshop.
! Secure the tow rope or tow bar to the
towing eye only. The vehicle may otherwise
be damaged.
Towing away and tow-starting
273
Breakdow
n
assi
stanc
e
Z