Mercedes-Benz Mercedes-AMG GT 2015, Руководство пользователя

Страница: 168 / 317

The display can also be updated without a
visible traffic sign if:
R
the vehicle changes roads (e.g. motorway
exit or slip road)
R
a village or town boundary is passed which
is stored in the digital map
R
the last traffic sign detected by the camera
has not been repeated
If a sign indicating the end of a restriction
(speed limit or overtaking restriction) is
passed, the sign is displayed for five seconds.
The currently applicable traffic regulation
continues to be shown in the assistance
graphic display (
Y
page 182).
The camera also detects traffic signs with a
restriction indicated by an additional sign
(e.g. in wet conditions).
The traffic signs are only displayed with the
restrictions if:
R
the regulation must be observed with the
restriction, or
R
Traffic Sign Assist is unable to determine
whether the restriction applies
If Traffic Sign Assist is unable to determine a
maximum permitted speed from any of the
available sources, no speed limit is displayed
in the instrument cluster either.
Traffic Sign Assist is not available in all coun-
tries. In this case, symbol : is shown in the
assistance graphic display (
Y
page 182).
Important safety notes
Traffic Sign Assist is only an aid and is not
always able to correctly display speed limits
and overtaking restrictions. Traffic signs
always have priority over the Traffic Sign
Assist display.
The system may be either functionally
impaired or temporarily unavailable if:
R
visibility is poor, e.g. due to snow, rain, fog
or spray
R
there is glare, e.g. from the sun being low in
the sky
R
there is dirt, ice or misting on the wind-
screen in the vicinity of the camera
R
traffic signs are hard to detect (dirt, ice,
snow)
R
the traffic signs are insufficiently lit at night
R
signs are ambiguous (e.g. traffic signs on
construction sites or in adjacent lanes)
R
the information in the digital street map of
the navigation system is incorrect or out of
date
Switching the message function on/off
The Traffic Sign Assist message function can
be switched on in the on-board computer.
When you pass a traffic sign, traffic regula-
tions (speed limits and overtaking restric-
tions) are shown in the multifunction display
for five seconds. The previous menu is then
shown automatically.
The wrong-way warning and the traffic sign
display for speed limits and overtaking
restrictions remain active even when the dis-
play has been deactivated.
X
Switch on the Traffic Sign Assist message
function via the on-board computer
(
Y
page 183).
Driving systems
165
Driving
and
parking
Z