Mercedes-Benz Freightliner Sprinter 2022, Руководство по эксплуатации

Страница: 262 / 334

#
Tighten the wheel bolts or nuts evenly in the
sequence indicated ( 1 to 6 ).
Speci ed tightening torque:
R
Steel wheel bolts: 177 lb- (240 Nm)
R
Wheel nuts: 133 lb- (180 Nm)
R
Alloy wheel bolts: 133 lb- (180 Nm)
#
Push the piston on the hydraulic jack in again
and close the pressure release screw.
#
VVehicles wit ehicles with all-wheel dr h all-wheel drivive: e: turn the jack
spindle clockwise as far as it will go.
%
You can now install the hub caps on steel
wheels with wheel bolts. The installation pro-
cedure depends on whether the hub cap acts
as wheel trim that covers the whole wheel, or
just covers the center.
#
Wheel tr Wheel trim: im: position the opening in the wheel
trim for the tire valve over the tire valve.
#
Push the wheel trim onto the wheel rim with
both hands until it engages into place. Make
sure the wheel trim retaining catches engage
on the steel wheel.
#
Wheel wit Wheel with centr h central hub cap: al hub cap: position the retain-
ing lugs of the central hub cap over the wheel
bolts.
#
Hit the middle of the hub cap to engage it on
the wheel.
#
Secure the faulty wheel in the spare wheel
holder.
#
VVehicles wit ehicles with Super Single tir h Super Single tires: es: transport the
faulty rear wheel in the load area. The rear
wheel is too large for the spare wheel holder.
#
Check the tire pressure of the newly installed
wheel and adjust it if necessary.
#
Retighten the wheel bolts or wheel nuts to the
speci ed tightening torque a er the vehicle
has been driven 31 miles (50 km).
#
When using a wheel or spare wheel with a new
or newly painted wheel rim, have the wheel
bolts or wheel nuts retightened a er approx-
imately 620 miles (1,000 km) to 3,100 miles
(5,000 km).
%
VVehicles wit ehicles with t h the tir he tire pr e pressur essure monit e monitor sy or sys- s-
ttem: em: all installed wheels must be equipped
with functioning sensors.
Make sure to observe the following further related
subject:
R
Notes on tire pressure ( / page 239)
Spar Spare wheel e wheel
NNoottes on t es on the emerg he emergency spar ency spare wheel and spare e wheel and spare
wheel wheel
Spar Spare wheel: e wheel: wheel and tire dimensions as well as
the type of tire correspond to the other installed
wheels.
Emerg
Emergency spar ency spare wheel: e wheel: wheel and/or tire dimen-
sions as well as the type of tire are di erent from
the wheel to be replaced. A label with a speed limit
can be found on the emergency spare wheel.
A installed emergency spare wheel or spare wheel
changes the driving characteristics and bears
risks.
&
W WARNING ARNING Risk of accident due to incor-
rect wheel and tire dimensions
Mounting an emergency spare wheel or spare
wheel may severely impair the driving charac-
teristics.
There is an increased risk of an accident.
To prevent hazardous situations:
#
Check the tire pressure of the spare
wheel or emergency spare wheel once
installed and, if necessary, adjust.
#
The emergency spare wheel may only be
used temporarily and must be replaced
with a standard wheel as soon as possi-
ble.
#
Never install more than one emergency
spare wheel.
#
Adapt your driving style and drive care-
fully in emergency spare wheel mode.
#
Do not switch o ESP ® .
260 260 Wheels and tires