%
Right-hand dr
Right-hand drivive v
e vehicle:
ehicle: the jump-start con-
nection may be on the opposite side.
#
Remove the cover from the POSITIVE terminal
of the donor battery.
#
First connect a red POSITIVE terminal clamp
1
of the starting assistance/charging cable
to the POSITIVE terminal of the donor battery.
#
With second red POSITIVE terminal clamp
2
of the starting assistance/charging cable, slide
the red protective cap on jump-start connec-
tion
3
back with a clockwise turn.
#
Attach second red POSITIVE terminal clamp
2
to the POSITIVE terminal of jump-start con-
nection
3
.
#
Dur
During st
ing star
arting assist
ting assistance:
ance: start the engine of
the donor vehicle and let it run at idle speed.
#
First, connect a black NEGATIVE terminal
clamp
4
of the starting assistance/charging
cable to the NEGATIVE terminal of the donor
battery.
#
Connect the second black NEGATIVE terminal
clamp
5
of the starting assistance/charging
cable to ground point
6
on your own vehicle
(bare metal part in the engine compartment).
#
Dur
During st
ing star
arting assist
ting assistance:
ance: start the engine on
your own vehicle.
#
When c
When char
harging:
ging: start the charging process.
#
Dur
During st
ing star
arting assist
ting assistance:
ance: let the engine run
for a few minutes.
#
Dur
During st
ing star
arting assist
ting assistance:
ance: before disconnect-
ing the jumper cable, switch on an electrical
consumer on your own vehicle, e.g. the rear
window heater or lighting.
When the starting assistance/charging process is
complete:
#
To remove the clamps of the starting assis-
tance/charging cable in reverse order: rst
remove second black NEGATIVE terminal
clamp
5
from ground point
6
in the engine
compartment, then black NEGATIVE terminal
clamp
4
from the donor battery. Then remove
second red POSITIVE terminal clamp
2
from
the POSITIVE terminal of jump-start connec-
tion
3
, followed by red POSITIVE terminal
clamp
1
on the donor battery.
The red protective cap springs back to its initial
position when second red POSITIVE terminal
clamp
2
is disconnected from jump-start
connection
3
.
You can obtain further information at a quali ed
specialist workshop.
Inst
Installing/r
alling/remo
emoving t
ving the
he oor
oor cov
cover
ering (v
ing (vehicles
ehicles
wit
with r
h rear wheel dr
ear wheel drivive)
e)
&
W
WARNING
ARNING Risk of accident due to objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardizes the operating and road safety
of the vehicle.
#
Stow all objects in the vehicle securely
so that they cannot get into the driver's
footwell.
#
Ensure oor mats and carpets cannot
slip and provide su cient room for the
pedals.
#
Do not lay multiple oor mats or carpets
on top of one another.
#
Switch o all electrical consumers.
226
226 Breakdown assistance
Содержание Freightliner Sprinter 2022
Страница 7: ......
Страница 12: ...NJ Brakes yellow 304 O ABS malfunction 304 P ESP deactivated 304 10 10 At a glance Instrument cluster...
Страница 21: ...ASpare wheel example 260 At a glance Emergencies and breakdowns 19 19...
Страница 208: ...A wheel arch may be subjected to a load of 330 lb 150 kg 206 206 Transporting...
