Mercedes-Benz Freightliner Sprinter 2022, Руководство по эксплуатации

Страница: 258 / 334

VVehicles wit ehicles with r h rear wheel dr ear wheel drive ive
#
Take the jack and the tire-change tool kit out of
the storage compartment (
/
page 255).
#
If necessary, remove the hub cap.
#
Assemble the lug wrench extension using the
middle rod and the rod with the largest diame-
ter from the three-piece jack pump lever.
#
Starting with the middle rod, slide the lug
wrench extension as far as it will go onto the
lug wrench.
#
Using the lug wrench, loosen the wheel nuts or
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the wheel
nuts or bolts completely.
#
Raise the vehicle ( / page 256).
RRaising t aising the v he vehicle when c ehicle when changing a wheel hanging a wheel
&
W WARNING ARNING Risk of injury from jack tipping
If you park a vehicle with air suspension, the
air suspension may remain activated for up to
one hour, even when the ignition is switched
o . If you then raise the vehicle with the jack,
the air suspension will attempt to adjust the
vehicle level.
The jack may tip.
#
Press the Service button on the air sus-
pension remote control before raising the
vehicle.
This prevents automatic readjustment of
the vehicle level and prevents it from
being raised or lowered manually.
&
W WARNING ARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
#
Only position the jack at the appropriate
jacking point of the vehicle. The base of
the jack must be positioned vertically
under the jacking point of the vehicle.
&
W WARNING ARNING Risk of injury from vehicle tip-
ping
On slopes, the jack could tip with the vehicle
raised.
#
Never change a wheel on a slope.
#
Consult a quali ed specialist workshop.
* NNOOTE TE Vehicle damage from the jack
If you do not position the jack correctly at the
appropriate jack support point of the vehicle,
the jack could tip over with the vehicle raised.
#
The jack is designed exclusively for jack-
ing up the vehicle at the jack support
points.
RReq equir uirements: ements:
R
There are no persons in the vehicle.
R
The vehicle is prepared for changing a wheel
(
/
page 255).
Only position the jack on the jack support points
intended for this purpose. You could otherwise
damage the vehicle.
Important notes on using the jack:
R
Only use the vehicle-speci c jack that has
been tested and approved by Freightliner
Sprinter to raise the vehicle. If the jack is used
incorrectly, it could tip over while the vehicle is
raised.
R
The jack is designed only to raise the vehicle
for a short time while a wheel is being changed
and is not suitable for carrying out mainte-
nance work under the vehicle.
R
Avoid changing a wheel on uphill and downhill
slopes.
R
The jack must be placed on a rm, at and
non-slip surface. If necessary, use a large, at,
load bearing and non-slip underlay.
R
The base of the jack is positioned vertically
under the jack support point.
256 256 Wheels and tires