Retracting/extending the roller sunblind
Extending the roller sunblind
In the following situations, the roller sunblind will
perform a reference drive and be completely
retracted:
R
if the power supply has been interrupted, e.g.
following operation of the battery disconnect
switch
R
if the vehicle is exposed to an excessive load,
e.g. due to a pothole
#
Briefly press the
§
button.
The roller sunblind will extend as far as the
end position.
or
#
Press and hold the
§
button until the
roller sunblind has reached the desired posi‐
tion.
Retracting the roller sunblind
#
Briefly press the
¦
button.
The roller sunblind will retract as far as the
end position.
or
#
Press and hold the
¦
button until the
roller sunblind has reached the desired posi‐
tion.
%
If an error has occurred and you press a but‐
ton, the roller sunblind will carry out a refer‐
ence drive. The roller sunblind will be retrac‐
ted into the upper end position at a slower
speed than normal. The roller sunblind will
now be ready for normal operation.
#
If a reference drive is interrupted: press
the
§
button and then press the
¦
but‐
ton immediately afterwards. The roller sun‐
blind will be retracted into the upper end
position.
54
Opening and closing
Содержание Actros
Страница 21: ......