#
Do not open the maintenance flap if a
wiper arm is folded forward.
#
Do not fold the wiper arms back without
the wiper blade.
Wiper blades are wear parts. Replace the wiper
blades at least once a year. Otherwise, the wind‐
screen will not be wiped properly.
Removing the wiper blades
#
Fold the wiper arms
3
away from the wind‐
screen.
#
Remove the hose
2
from the pipe jet.
#
Push the wiper blade in the direction of the
arrow
1
as far as it will go onto the wiper
arm.
#
Slide the catch
2
in the direction of the
arrow
3
until it engages in the removal posi‐
tion.
#
Remove the wiper blade in the direction of
the arrow
4
away from the wiper arm.
Fitting the wiper blades
#
Insert the new wiper blade into the wiper arm
in the direction of the arrow
1
.
#
Slide the catch
2
in the direction of the
arrow
3
until it engages in the locking posi‐
tion.
#
Make sure that the wiper blade is seated cor‐
rectly.
#
Fold the wiper arms back onto the wind‐
screen.
Checking/topping up the motor oil
Checking the oil level
#
Check the oil level using the on-board com‐
puter (
/
page 124).
#
Only use oils approved for the vehicle and
which meet the specified SAE classifications
(
/
page 385).
Topping up the engine oil
*
NOTE Engine damage caused by driving
with excess engine oil
#
Avoid long journeys with excess engine
oil.
326 Maintenance and care
Содержание Actros
Страница 21: ......