appears and you will hear a corresponding mes‐
sage.
Using routes requiring a special toll sticker
#
Select
Use routes requiring a special toll
sticker
.
#
Activate
All
D
.
or
#
Switch on
D
the countries that should be
taken into account.
The route takes into account roads in the
selected countries which require you to pay a
time-based fee (vignette). A vignette allows
for the use of a route network for a limited
time period.
Alternative for calling up route types
#
Select
©
.
#
Select
Navigation
.
#
Select
Z
.
#
Select
Additional
.
#
Select
Avoid areas
.
Sounds and warnings
Setting the warning type
The following settings are available:
R
Read out warnings
: when this setting is
active, spoken warnings and warning sounds
are issued during the journey.
R
Warning sounds
: when this setting is active,
warning sounds are issued during the journey.
R
Only visual
: when this setting is active, no
warning sounds and spoken warnings are
issued during the journey.
#
Call up the navigation system menu
(
/
page 165).
#
Call up the navigation settings (
/
page 173).
#
Select
Sounds and warnings
.
#
Select
Warning type
.
#
Select the desired setting.
The active setting is indicated by the dot.
Setting safety warnings
The following settings are available:
R
Always:
when the vehicle approaches an area
of danger, navigation issues a warning.
R
Only when driving fast:
when the vehicle
approaches an area of danger and exceeds
the maximum permissible speed, navigation
issues a warning.
R
Never:
the navigation does not issue a warn‐
ing.
#
Call up the navigation system menu
(
/
page 165).
#
Call up the navigation settings (
/
page 173).
#
Select
Sounds and warnings
.
#
Select
Radar cameras and hazards
.
A list of hazard types appears.
#
Select a type of hazard.
#
Select the desired setting.
The active setting is indicated by the dot.
Setting reading out of traffic warnings
#
Call up the navigation system menu
(
/
page 165).
#
Call up the navigation settings (
/
page 173).
#
Select
Sounds and warnings
.
#
Select
Read out traffic warnings
.
The active setting is highlighted in colour.
Setting the units
#
Call up the navigation menu Calling up the
navigation menu(
/
page 165).
#
Call up the navigation settings Calling up navi‐
gation settings(
/
page 173).
#
Select
Units
.
#
Select the desired setting.
The active setting is indicated by the dot.
Calling up the info menu
1
Calls up navigation settings
2
Calls up the info menu
The following settings are available:
R
Tour:
a short introduction to the use of the
navigation appears
R
Info:
information about the navigation system
appears, for instance, the software status
176 Multimedia system
Содержание Actros
Страница 21: ......