Mercedes-Benz 1984 300SD, Руководство пользователя

Страница: 79 / 101

Electrical System
Replacing Bulbs:
Bulbs fo r turn signal, standing, side
marker and parking lamps (21 /5 W /
32/3 c p ):
Turn lamp holder with bulb to the left
and remove. Depress bulb, turn to the
left and take out.
Sealed-beam unit fo r high and low
beam (Sealed-beam /Halogen):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
securing screw s (6) and rem ove fro n t
cover. Remove securing screw s (8)
from retaining frame and take out
sealed-beam unit. Pull o ff connector.
Bulb fo r fog lamp (H 3):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
securing screw s (6) and remove fro n t
cover. Remove securing screw s (10)
and take out lamp holder. Pull o ff plug
c o nnector (12). Disengage retaining
spring (13) and take o u t bulb.
Tail Lamp Assemblies
1 Side m arker lamp (10 W /6 cp)
2 Turn signal lamp (21 W /32 cp)
3 S top lamp (21 W /32 cp)
4 Tail, parking and standing lamp
(10 W /6 cp)
5 Backup lamp (21 W /32 cp)
Turn both locks in the tru n k to the left
as far as the stop and detach lamp
bracket. To replace the bulbs,
depress, turn to the left and remove.
License Plate Lamps
(5 W fe stoon lamp)
Loosen both the securing screw s (1)
and take out lamp.
77