Mercedes-Benz 1984 300SD, Руководство пользователя

Страница: 96 / 101

Consumer Information
This has been prepared as required of
all manufacturers of passenger cars
under Title 49, Code of U.S. Federal
Regulations, Part 575 pursuant to the
“ National Traffic and M otor Vehicle
Safety A c t of 1966” .
Uniform Tire Quality Grading
Relevant tire grade inform ation on tire
flanks.
All passenger car tires m ust conform
to federal safety requirem ents in
addition to these grades.
Traction “ A ” , “ B ” , “ C ”
The traction grades, from highest to
lowest, are “ A ” , “ B " and “ C ” and
they represent the tire ’s ability to stop
on w et pavement as measured under
c o ntrolled conditions on specified
governm ent te st surfaces of asphalt
and concrete. A tire marked “ C ” may
have poor traction perform ance.
W arning: The traction grade assigned
to this tire is based on braking
(straightahead) traction te sts and
does not include cornering (turning)
traction.
Tem perature “ A ” , “ B ” , “ C ”
The tem perature grades of “ A ” (the
highest). “ B " and " C ” representing
the tire ’s resistance to the generation
of heat and its ability to dissipate heat
when tested under controlled condi­
tio n s on a specified indoor laboratory
te s t wheel. Sustained high tem pera­
ture can cause the material of the tire
to degenerate and reduce tire life, and
excessive tem perature can lead to
sudden tire failure. The grade “ C ”
corresponds to a level of perform ­
ance w hich all passenger car tires
m ust meet under the Federal M otor
Vehicle Safety Standard No. 109.
Grades “ B ” and “ A ” represent higher
levels of perform ance on the labora­
to ry test wheel than the minimum
required by law. W arning: The te m ­
perature grade fo r this tire is estab­
lished for a tire that is properly
inflated and not overloaded. Exces­
sive speed, underinflation, or exces­
sive loading, either separately or in
com bination, can cause heat buildup
and possible tire failure.
94