User manual ZUP-230V
Nr dok. 0697.00.95-02.3
4/15
- after disconnection of discharged battery
0.33mA
Maximum, additional resistance in battery circuit Ri max. *6)
25
mΩ/45Ah;
19
mΩ/75Ah
Environment
Operating temperature
-
5…+40°C
Level of security EN 60529:2003
IP 42
*1) The power and output circuits of 230Vac have the common conductor N.
*2) The presence of the mains voltage is recognized for
the voltage of above 184V ±11V.
*3) The voltage is not synchronized with the mains voltage.
*4) With a battery charged at 25
C.
*5) The specified range includes the voltage between the voltage of the discharged battery bank (at the end of the
battery cycle) and the voltage of the bulk charging.
The detailed description of the ZSP121N-DR power supply operation is included in a separate User Manual.
*6) The markings according to the EN 54-4 + A1 + A2 standard
Standards compatibility
Electrical safety
EN 60950-1:2007 + A1:2011 class I
Functionality
EN 54-4:2001 + A1:2004 + A2:2007
Functionality class
EN 12101-10:2007 class A
Environmental class
EN 12101-10:2007 class 1
Radio disturbances
EN 55022:2013 class B
EMC immunity
EN 50130-4:2012 + A1:2015
EMC emission
EN 61000-3-2:2007 + A1:2010 + A2:2010
EN 61000-3-3:2011
Construction.
Power supply assembly
Equipment
Quantity
Notes
Power supply ZUP-230V
1
Battery bank 12V
2
Capacity depends on type of power supply
Temperature sensor
1
For power supply ZSP121N-DR
Cable (connector) of battery bank
1
Equipped with 2 ring cable lugs
Ø
6
Glands
M16×1.5
2
Quantity can be changed when ordering
Glands
M20×1.5
3
Quantity can be changed when ordering
Note
The power supply casing has holes protected with glands prepared for mechanical removal during
assembly:
•
in the upper part for 5 M16 × 1.5 glands and 7 M20 × 1.5 glands;
•
in the lower part for 3 M16 × 1.5 glands and 5 M20 × 1.5 glands.
The possible location of all glands on the power supply casing is shown in Fig.1.
The simplified diagram of the power supply is shown in Fig.2. The power supply includes:
•
main 230Vac power distribution block (ZUP);
•
24Vdc/230Vac inverter;
•
24V battery bank;
•
ZSP121N-DR power supply, basic function of which is charging and supervision of the
battery bank and powering 230V power distribution block.