Memmert INCO 108 Скачать руководство пользователя страница 58

Страница: 58 / 64

Advanced functions

For identification purposes, each appliance connected must have its own unique IP address.

Each chamber is delivered by default with the IP address 192.168.100.100. The program

“XTADMIN”, which can be found on the CD-ROM provided, can be used to change the IP ad-

dress.

Setting the IP address is described in a separate manual.

7.8 Log memory

(only for models with communication or premium modules)
The controller continually logs all relevant measured values, settings and error messages at

1-minute intervals.
The internal log memory is listed as a ring memory, i. e. the oldest log data are always over-

written automatically with new data.
The logging function cannot be switched off, but is always active. The measured data are

stored in the controller, safe from manipulation. Each dataset is stored with a unique times-

tamp.
The internal log memory has a size of 1024 kB. This corresponds to a storage capacity for

about three months in permanent operation.
If the power supply is interrupted, the time of the power cut and the return of voltage are

stored in the controller.

Reading in the log memory to the PC via USB interface

For documentation purposes, log data can be read out via an interface.

The log memory of the controller is not modified or deleted by the reading out.

Printing out log memory

(see also Chapter “ Printer “ on page

43 )

For a printout, the GLP header is also printed automatically, and contains the following details:

Date of printout

Period of log

Consecutive page numbers

Serial numbers and appliance name

If the printer is not ready (e. g. ink cartridge or paper tray empty), no log data will be

lost. Multiple printouts can also be made, since the log memory is not deleted after print-

ing.

Содержание INCO 108

































































Результаты поиска

Содержание INCO 108

Отзывы:

Похожие инструкции для INCO 108

Бренды по названию

Популярные бренды

Memmert INCO 108, Руководство по эксплуатации

Результаты поиска

Содержание INCO 108

Отзывы:

Похожие инструкции для INCO 108

Бренды по названию

Популярные бренды