26
Operation and control
5.4 Inserting water tray(s)
(for appliances with basic fittings)
Fill the water tray with distilled water and push into the lowest slot ( Fig. 15 ).
Fig. 15
Inserting water tray(s)
INCO
model
Number
of
water
trays
Filling
level in
cm for
each tray
approx.
Amount
of water
in ltr. for
each tray
approx.
1
1.5 to 2.5
1 to 1.5
153
1
1.5 to 2.5
1 to 1.5
246
2
1.5 to 2.5
1 to 1.5
5.5 Connect gas supply
1. Check that the gas bottle(s) is properly connected (see also page 13 ).
2. Open valve(s).
5.6 Switch on appliance
The incubator is switched on and off by pressing the main switch/ push-turn control on the
/
front of the appliance.
Ź
Switching on: press the main switch so that it comes out of the appliance ( Fig. 16 ).
Ź
Switching off: press the main switch so that it retracts back into the appliance ( Fig. 17 ).
Fig. 16
Switching on incubator
Fig. 17
Switching off incubator
