Memmert INCO 108 Скачать руководство пользователя страница 43

Страница: 43 / 64

Advanced functions

7. Advanced functions

7.1 Printer

(only for models with communication or premium modules)
Incubators with a communication or premium module are equipped with a parallel printer

port, as used in computers. Standard PCL3 compatible inkjet printers with a parallel port (e.g.

HP DeskJet 5550 or HP DeskJet 9xx) can be connected to the printer interface on the rear of

the appliance (see page ).
Make sure that a shielded interface cable is used. The shielding must be connected to the plug

casing.
The controller has an internal log memory (see page 58 ). The log data can be printed out in

this mode via the connected printer.
If a colour printer is connected, the various graphs are printed out in colour.
For a printout, the GLP header is also printed automatically, containing the following details:

Date of printout

Period of log

Consecutive page numbers

Serial numbers and appliance name

Running the printing function:

Select the PRINT operating mode with the

push-turn control, as described on page 28 . By

turning the push-turn control and holding down

the SET key, the following parameters can be selected and altered one after another, as

described in Chapter “ Basic operation “ on page 27 :

Querying the date of the first print page

Querying the date of the last print page

Leaving the print menu and returning to the main menu

Basic appliance settings (Setup)

(Setting options may vary depending on the appliance model)
In this operating mode, the basic settings for the

appliance can be made. The time, date, day and

year are set here, along with the settings for the

horn, the address allocation, the monitoring

units and the calibration.

SETUP

Содержание INCO 108

































































Результаты поиска

Содержание INCO 108

Отзывы:

Похожие инструкции для INCO 108

Бренды по названию

Популярные бренды

Memmert INCO 108, Руководство по эксплуатации

Результаты поиска

Содержание INCO 108

Отзывы:

Похожие инструкции для INCO 108

Бренды по названию

Популярные бренды