10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
87
Mellanox Technologies
Figure
8-2. TFM Table
– Right-click Menu
8.2.1.3
Inserting a New Rule
To add a new rule to the TFM table:
Step 1
Click the
Insert
icon in the TFM Table or select
Insert Rule
from the right-click menu.
The following dialog box is displayed.
Figure
8-3. Inserting (Adding) a Rule
The following tables detail the parameters listed in the Insert Rule Box:
Table
8-3. New Rule Parameters
Parameter
Description
Source Address
The source IP address. Enter a value of
any
when you wish to apply
the rule to all packets, regardless of the source IP address.
Source Mask
The source subnet mask. To specify a range of IP addresses, e.g. if
we want to take into consideration all IP addresses in the
192.168.2.* subnet, then we use 255.255.255.0 as
source-ip-mask
. Enter a value of
any
when you wish to apply the
rule to all packets regardless of the subnet mask value.
Destination Address
The destination IP address. Enter a value of
any
when you wish to
apply the rule to all packets, regardless of the destination IP
address.
Destination Mask
The subnet mask of the destination.
Interface Name
The interface to which the rule is applied.
