10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
59
Mellanox Technologies
Backing up the configuration
Remote
to download
the backup
configuration from the
remote server.
)#copy remote:
running-config
copy remote:
[remote-path]
running-config
remote server using previously defined
server name, user name, and password.
The remote path must contain the
exported file name. The new values will
be applied on reboot.
Optional
Click
Copy to Flash
to
save a backup of the
configuration in the
local repository.
10G(config-remote
)#copy
running-config
flash:
copy
running-config
flash: [file-name]
Backs up the configuration into file in the
local repository.
In case of empty name the file name is
set by default (example of default format:
repository_sRB-20210G-38fa_6_47_200
8-01-21_IP_172.30.106.32.new).
You can back up to two files. Backing up
additional files will prompt a message
that you are over the limit.
Optional
Click
Load from Flash
to restore the backup
configuration.
10G(config-remote
)#copy flash:
running-config
copy flash:
[file-name]
running-config
This restores the backup configuration.
This command retrieves the repository
configuration from a file stored in the
Flash, restores it and saves it in the
switch repository (database). The new
values will be applied on reboot.
Optional
Click
Delete from
Flash
to delete the
specific repository file
from flash.
10G(config-remote)
#flash delete
Deletes the specific repository file from
flash.
Step 2
Click the
Refresh
button (
) to update this dialog box. This enables you to refresh the
data and view the updated information without closing the window.
Step 3
Click
Apply
and
OK
.
6.4
Setting Link Aggregation (LAG)
This tool enables load balancing by logically aggregating ports as trunks to optimize network
traffic performance. It also provides automatic redundancy. Should one of the multiple ports
used in a link fail, network traffic is dynamically redirected to flow across the remaining good
ports in the trunk.
By default, the gateway is set to Full LAG Mode, meaning that two are aggregated into a
single trunk. In the code, full link aggregation appears as P1-2.
Separate LAG means no link aggregation. In the code, Separate LAG appears as P1, P2.
The example in
