10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
71
Mellanox Technologies
To set the event policy filters:
Step 1
On the unit’s sRB-20210G graphic image, right-click the management module area; a pop-up
menu appears.
Step 2
From the pop-up menu, select
Policy Table
; the Policy Table dialog box appears.
Step 3
For each event type, make the required selections as explained below.
Step 4
Click
Apply
(apply the changes without closing the dialog box) or
OK
(apply the changes and
close the dialog box).
Figure
6-12. Policy Table Dialog Box
The following table summarizes the events for which you can determine the required settings:
Table
6-5. Event Types
Event
Description
SM LID Change
The Subnet Manager’s LID parameter has changed
IB Port LID Change
The InfiniBand port
’s LID parameter has changed
(InfiniBand port of the 10 GbE gateway)
SM Registered to Events
The Subnet Manager has been registered to handle
events
Link ETH Port State
An Ethernet link’s port state has changed
