10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
171
Mellanox Technologies
lag-mode set
Description:
Changes the Link Aggregation Mode of the gateway.
By default, the gateway is set to Full LAG (both ports are aggregated).
In Separate Mode, there is no link aggregation.
Syntax:
lag-mode set [full, separate]
Example:
sRB-20210G-61f0(config-if)# lag-mode set full
lag-mode show
Description:
Displays the Link Aggregation Mode settings of the gateway.
Syntax:
lag-mode show
Example:
sRB-20210G-61f0(config-if)# lag-mode show
LAG mode is: full LAG
14.6.4
NTP Options
The NTP menu allows you to configure NTP (Network Time Protocol). The NTP menu allows
sRB-20210G clock synchronization with a managing Switch.
The following commands are available under the NTP menu.
10G-Card(config-ntp)# ?
<command> ? Displays the command's usage string.
? Displays the list of available commands.
clock show Displays the system clock.
end Ends the CLI.
exit Exits to previous menu.
ntp show Shows the NTP attributes
time-zone list show Shows a list of time zones
time-zone set Sets the switch time zone
The NTP syntax usage is as follows:
time-zone set [location number - refer to time zone list]
The following details the commands available under the NTP menu.
clock show
Description:
Displays the sRB-20210G system clock.
Syntax:
clock show
Example:
sRB-20210G-61f0(config-ntp)# clock show
Tue Mar 25 16:08:25 UTC 2008
