10 GbE Gateway
(sRB-20210G Module) User Manual
Version 2.0
81
Mellanox Technologies
To remove all networks from the Network Table:
Step
Right-click inside the
Networks Table
and select
Remove All Networks
from the menu. All
user-defined networks are removed.
7.1.5
Updating the Default Gateway
To update a Default Gateway:
Step 1
Right-click inside the
Networks Table
and select
Default Gateway
from the menu. The
following dialog box is displayed.
Figure
7-5. Update Default Gateway Dialog Box
Step 2
Enter the following information:
Table
7-3. Update Default Gateway Parameters
Parameter
Description
Interface Name
Enter the name of the interface the on which the default gateway
resides.
IP Address
Enter the IP address of the default gateway.
You can see the updates to the Default Gateway under the
10G Static Route
menu.
Step 3
Click
OK
to save your settings.
7.1.6
Removing a Default Gateway
To remove a Default Gateway:
Step
Right-click a specific network inside the
Networks Table
and select
Remove Default
Gateway
from the menu. The Gateway is removed.
You can see the updated changes under the
10G Static Route
table (accessible from the
Device Tree).
