Meler Micron PUR LC, Инструкция по эксплуатации

Страница: 24 / 106

MELER GLUING SOLUTIONS INSTALLATION
3-4
Mounting the equipment
For mounting the equipments set the base in the desired location using the
indicated holes M8 screws. To move the equipment more comfortably use the
eyebolts included for this purpose.
Warning: Make sure that the bench where the base plate is fastened is level,
free from vibrations and is able to support the weight of the equipment in
addition to the full tank load.
Besides, these melters may come with wheels (optional) so they can be easily
moved and located near to the main machine.
The four wheels turn 360º, and two are equipped with brakes. To move the
unit, unlock the two wheels by lifting the lever.
Slide the unit to its final position. Lock the wheels once again, lowering the
levers.
Electrical power connection
‘’ series melters/applicators are designed to be connected to the
electrical power supply in three possible ways, depending on the power of
different elements connected:
• 1-phase 230 VAC with neutral
• 3-phases 240/400 VAC with neutral
A good ground connection is required in all cases.
Los valores de consumo, según equipo fusor y configuración de salidas, son
los que se ven en la tabla adjunta. Para este cálculo se ha tenido en cuenta
sólo el caso de llevar bomba simple, para consumos con bomba doble,
consultar. Debido a la conexión de alta potencia, Meler recomienda conectar
trifásico 400/230 VAC con neutro.
Warning: Risk of electrical shock. Carelessness may cause injury or death.
(1)
La máxima corriente admisible de conexión es de 27 A por fase. En la
tabla se indican las corrientes máximas en el caso de utilizar la máxima
potencia posible. Estimar en cada caso la potencia que va a instalarse para
elegir la conexión idónea.
UNIT No. OUTPUTS
1 Phases
(1)
3 Phases
230 VAC 400 VAC Y
1 Pump 2 Pump 1 Pump 2 Pump
PUR
LC
2 27 A (!) 27 A (!) 12,80 14,17
4 27 A (!) 27 A (!) 19,76 21,13
6 27 A (!) 27 A (!) 25,09 25,09
PUR
MC
2 - - 22,80 24,17
4 - - 27 A (!) 27 A (!)
6 - - 27 A (!) 27 A (!)
Maximum connection power for each hose-applicator pair: 1,800W