manualshive.com logo in svg

Meler MACRO FOAM Series, Инструкция по эксплуатации, Страница: 50 / 88

Поделиться
Скачать
Meler MACRO FOAM Series Скачать руководство пользователя страница 50

FOCKE MELER GLUING SOLUTIONS, S.A.

4-16

MELTER OPERATION

LED indicators

Described below are the LED indicators on the pump control card to identify 

the status of the equipment: 

1. Control card ON/OFF LED:

 when the external 24 Vdc power supply is 

present, this LED will always be illuminated; with no power supply, it will be 

turned off. This LED is green in colour.

2. Pumping ON/OFF LED: 

when pumping is enabled, this LED will be turned off, 

and will be illuminated when pumping is disabled. This LED is in colour.

3. Int and ext (ok) LEDs: 

when the equipment is operating in Internal start-stop 

(ok) mode, the ‘int’ LED will be illuminated and the ‘ext’ LED will be turned off. 

When the equipment is operating in external start-stop (ok) mode, the ‘ext’ LED 

will be illuminated. And the ‘int’ LED will be turned off. These can never be both 

on or both off at the same time. These LEDs are green in colour.

4. Int and ext (ref) LEDs: 

when the equipment is operating in internal 

reference mode, the ‘int‘ LED will be illuminated and the ‘ext’ LED turned off. 

When the equipment is operating in external reference mode, the ‘ext’ LED 

will be illuminated and the ‘int’ LED will be turned off. These can never be 

both on or both off at the same time. These LEDs are green in colour.

5. Ext on LED: 

when the equipment is operating in external start-stop 

(OK) mode, and the external permission contact is closed, this LED will be 

illuminated; if the external contact is open, this LED is turned off. This LED is 

green in colour. 

6. Ext ref LED:

 when operating in external reference mode and the external 

reference voltage is other than zero, this LED will be illuminated. When the external 

reference voltage is zero, this LED will be turned off. This LED is green in colour.

7. In/Out LED: 

when operating in external set point reference mode, these 

LEDs will be activated and deactivated as the pressure curve options are 

programmed. These LEDs are green in colour.

1

7

4

3

2

6

5

Содержание MACRO FOAM Series

























































































Отзывы:

Нет отзывов